Select category

RCW

FERTILIZATION - MINERAL FERTILIZATION - RCW
IMG_20210818_104005
IMG_20210818_104005
IMG_20210818_101530
IMG_20210602_111946
Machine description

The new line is characterized by a changed design, a reinforced frame structure and a fertilizer box modified in such a way that the material falls on the floor conveyor more efficiently. The versatility of the spreader, consisting in the possibility of sowing granulated fertilizers and lime, translates into real savings, and the impressive working widths up to 36 m make the machine extremely efficient. The H versions are 25 cm higher than the standard ones, which reduces losses during tramline runs.

Standard equipment
RCW
  • PILOT JOY controller allows to maintain the desired seeding dose regardless of the driving speed [RCW 60 H, 85 H, 130 TD]
  • fertilizer dosing system on the discs by belt conveyor
  • conveyor drive from star wheel [RCW 45, 60, 85, 90 TD, 110 TD]
  • hydraulic conveyor drive [RCW 65 H, 85 H, 130 TD]
  • mechanical drive of spinner discs
  • spinner discs for fertilizer and lime made of stainless steel
  • border disc
  • hopper sieves
  • top or bottom hitch [RCW 130 TD suspended lower hitch]
  • mechanical drawbar support
  • single-axis spreader [RCW 45÷85 H]
  • sprung tandem spreader [RCW 90 TD, 110 TD], Boogie type [RCW 130 TD]
  • 2-line air brake system
  • handbrake
  • lighting installation
  • variable wheelbase [only RCW 60 H and 85 H]
  • rear steering axle [only RCW 130 TD]
  • wide angle PTO shaft (620 Nm)
  • mudguards [RCW 45, 60, 60 H, 85, 85 H, 90 TD, 110 TD]
Optional equipment
RCW
  • PILOT JOY controller – main of taining of the preset dose of fertilizer or lime independently of driving speed (hydraulic belt drive)
  • multifunction control w.SUPERIOR Computer – main of taining of the preset dose of fertilizer or lime independently of driving speed (hydraulic belt drive / RCW 45, 60, 85, 90 TD, 110 TD)
  • multifunction control w.SUPERIOR Computer – main of taining of the preset dose of fertilizer or lime independently of driving speed (hydraulic belt drive / RCW 60 H, 85 H, 130 TD)
  • resignation from controller SUPERIOR (monitor)
  • ISOBUS control and variable application rate (GFX-750 panel, NAV 500 receiver, VRA)
  • ISOBUS control and variable application rate (GFX-350 panel, NAV 500 receiver, VRA)
  • ISOBUS control (without: monitor, navigation, variable rate)
  • transitional cable (speed sensor from socket ISO 7-pin ISO11786)
  • hydraulically folded load box tarpaulin – directly controlled
  • load box tarpaulin folded hydraulically – SUPERIOR or ISOBUS
  • device for border spreading of granular fertilizers, mechanically folded
  • device for border spreading of granular fertilizers, hydraulically folded
  • device for boundary spreading of granular fertilizers – hydraulically foldable by means of a SUPERIOR Computer or ISOBUS
  • hydraulic tailgate left/right – directly controlled
  • hydraulic tailgate left/right – SUPERIOR or ISOBUS
  • mechanical conveyor drive (only for RCW 130 TD / without PILOT JOY)
  • hydraulic support [RCW 130 TD]
  • beam for sowing dust lime, 9m wide (only for RCW 130 TD with SUPERIOR computer or ISOBUS)
  • beam for sowing dust lime, 12m wide (only for RCW 130 TD with SUPERIOR computer or ISOBUS)
  • ball hitch K80
  • mudguards [RCW 130 TD]
  • hydraulic brake system (no EU 167/2013 homologation)
  • resignation from homologation (no marker lights, 1-line brake system)
  • other wheels options avaliable on UNIA ordering portal
Construction
Strome ściany.jpg   Steeper walls of the reservoir
ensure proper getting granular fertilizers and lime on the conveyor.
Belt conveyor
fabric-rubber (three times reinforced with fabric) ensures an even flow of material to the spreading discs, and the sown fertilizer is not damaged.		   rcw-pas.jpg
rcw-naped-mechaniczny.jpg   Mechanical conveyor drive
makes the speed of the belt conveyor advance dependent on the driving speed.
Hydraulic drive
allows for precise control of the seeding rate using one of the available controllers (PILOT JOY, SUPERIOR, ISOBUS)		   rcw-naped-hydrauliczny.jpg
Plandeka hydrauliczna.jpg   Hydraulic tarpaulin (option)
enables the continuation of work in bad weather conditions, protecting the fertilizer from getting wet during rainfall.
Spreading discs
as standard, two sets of discs (for lime and granules) and an extreme disc are available.		   rcw-tarcze.jpg
Szer. robocza.JPG   Impressive working width
from 10 to 36 meters, ensuring unique work efficiency.
Limiter
allows you to easily obtain the best precision of spreading at the field boundaries.		   Limiter.JPG
Resorowany tandem.JPG   Sprung tandem
ensures smooth running and reduces specific pressure on the soil (RCW 90, 110, 130 TD).
Sprung drawbar
eliminates shocks transferred to the tractor hitch (RCW 130 TD).		   Resorowany dyszel.JPG
Zasuwy.jpg  

Hydraulic shutter (left / right)
for even more precise sowing.
PILOT JOY
allows you to maintain the set dose of fertilizer regardless of the driving speed, quickly change the size of the sown dose in the range from -50% to + 50% every 10%, measure the obtained efficiency (ha / h), perform a calibration test and keep statistics for 10 fields.		    PILOT JOY.png
Superior.png    

SUPERIOR
RCW spreaders can be equipped with a SUPERIOR computer, which guarantees maintaining the set dose regardless of the driving speed, and also allows for a quick dose change in increments of 5% in the range of +/- 45%, without leaving the cabin. In addition, SUPERIOR monitors the operating parameters of the machine and creates reports on the sown fields.
ISOBUS (3 control variants)
equipped with the ISOBUS system and variable dosing functions, they ensure the highest precision of sowing and allow you to apply fertilizer based on the fertility maps, which makes the field more even and each plant receives the right amount of fertilizer.		    ISOBUS.png
Specyfikacja techniczna
RCW 45 60 60 H 85 85 H 90 TD 110 TD 130 TD
Hopper capacity [dm³] 4500 6000 6000 8500 8500 9000 11000 13000
Working width - granulated fertilizers [m] 10÷36 10÷36 10÷36 10÷36 10÷36 10÷36 10÷36 10÷48
Working width - lime [m] 8÷16 8÷16 8÷16 8÷16 8÷16 8÷16 8÷16 8÷16
Dimensions
length / width / height [m]
 4,93 / 2,52 / 2,43 5,42 / 2,40 / 2,45 5,56 / 2,57 / 2,74 5,42 / 2,45 / 2,79 5,56 / 2,62 / 3,10 6,67 / 2,40 / 2,59 6,67 / 2,45 / 2,78 7,05 / 2,70 / 3,04
Weight [kg] 2430 2840 3230 3120 3630 4200 4400 5600
Power demand [HP] 40÷60 60÷70 60÷70 80÷90 80÷90 130÷170 130÷170 >200
Standard tyres 500/60-22,5 550/60-22,5 18.4 R38 550/60-22,5 520/85 R38 500/60-22,5 550/60-22,5 600/55-22,5
GALERIA_1.JPG
 
GALERIA_2.JPG
 
GALERIA_3.JPG
 
GALERIA_4.jpg
 
GALERIA_5.JPG
 

Find a dealer

Find dealer:

>City W promieniu:

Order Portal

ONLINE CATALOG